Engine

09 - Bunkering Operations

Active monitoring and control procedures during fuel transfer operations ensuring safe pumping rates, proper distribution, and continuous system surveillance.

System Operation and Flow Control

#	Action	Status
1	Biocide System Running and Pump Rate	SET
2	Pumping Initiated at Minimum Rate	AGREED
3	Distribution to Correct Tank	VERIFIED
4	Closed Tank Levels Steady	VERIFIED
5	Pump Rate Adjusted to Maximum Rate	SET
6	Minimum Rate When Tank Isolation	IMPLEMENTED

Continuous Monitoring Requirements

#	Action	Status
7	Communication and Deck Watch	MAINTAINED
8	Tank Levels at All Times	MONITORED
9	Overflow Side Glass	CHECKED
10	Trim and List for Even Keel	MONITORED

Final securing procedures and documentation completion following fuel transfer operations ensuring system integrity and regulatory compliance.

System Securing and Disconnection

#	Action	Status
11	Hose Drained and Blown Through	COMPLETED
12	Filling Valves	CLOSED
13	All Remote Controlled Valves	CLOSED
14	Filling Hose	DISCONNECTED
15	Bunker Station	BLANKED

Verification and Documentation

#	Action	Status
16	Supplier Meter Versus Tank Level	COMPARED
17	Fuel Samples	OBTAINED
18	All Receipts and Certificates	RECEIVED
19	Vessel Load Line	CHECKED

Final Actions and Records

#	Action	Status
20	Completion	BRIDGE INFORMED
21	Red Bravo Flag	LOWERED
22	Bunkering in Oil Record Book	LOGGED
23	High and Low Level Alarms	RESET

Bunkering Preparation

Comprehensive preparation for fuel loading operations ensuring safety protocols, equipment readiness, and regulatory compliance prior to fuel transfer commencement.

Dry Dock Entry

Comprehensive preparation for dry dock entry including pre-operation verification, critical systems shutdown, and power transition from main generators to emergency power.